Splitting Data Query

DECLARE @STR VARCHAR(100) = 'Hi how are you doing? I am good.'
DECLARE @dev VARCHAR(1) = ' '

SELECT Split.a.value('.', 'VARCHAR(100)') AS E
FROM (
 SELECT Cast('<M> ' + Replace(Replace(@str, @dev, @dev + '</M><M>'), '.', '') + ' </M>' AS XML) AS yo
 ) a
CROSS APPLY yo.nodes('/M') AS SPLIT(a)

Encrypt And Decrypt Data Using Certificate In SQL Server

CREATE DATABASE Dbavimal
GO

USE Dbavimal
GO

--Create MasterKey
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'DBAVimal!';
GO

-- Create Certificate
CREATE CERTIFICATE [EncryptionCert]
 WITH SUBJECT = 'DBAEncryption'
GO

-- Symmetric Key
CREATE SYMMETRIC KEY SymmetricDBAVimalKey
 WITH ALGORITHM = AES_192 ENCRYPTION BY CERTIFICATE [EncryptionCert]
GO

--Use Symmetric Key
OPEN SYMMETRIC KEY SymmetricDBAVimalKey DECRYPTION BY CERTIFICATE [EncryptionCert]
GO

-----------------------------
CREATE FUNCTION [dbo].[fn_Encrypt] (@Data VARCHAR(max))
RETURNS VARBINARY(256)
AS
BEGIN
 DECLARE @Result VARBINARY(256)

 SET @Result = EncryptByKey(Key_GUID('SymmetricDBAVimalKey'), @Data)

 RETURN @Result
END
GO

-------------------------------
CREATE FUNCTION [dbo].[fn_Decrypt] (@Data VARCHAR(max))
RETURNS VARCHAR(max)
AS
BEGIN
 DECLARE @Result VARCHAR(max)

 SET @Result = DecryptByKey(@Data)

 RETURN @Result
END
GO

-----------------------------------
--Test the result (Same way you can store your data on tables)
DECLARE @Str VARCHAR(500) = 'Hello'

PRINT '====Original Data============'
PRINT @Str
PRINT '============================='

DECLARE @EncryptedData VARCHAR(256)
DECLARE @DecryptedData VARCHAR(256)

SET @EncryptedData = [dbo].[fn_Encrypt](@Str)

PRINT '====Encrypted Data==========='
PRINT @EncryptedData
PRINT '============================='

SET @DecryptedData = [dbo].[fn_Decrypt](@EncryptedData)

PRINT '====Data After Decryption===='
PRINT @DecryptedData
PRINT '============================='

USE master
GO

DROP DATABASE Dbavimal

SQL Server T-Sql Performance Tuning Tips : Sargable

In a WHERE clause, the various operators used directly affect how fast a query is run. This is because some operators lend themselves to speed over other operators. Of course, you may not have any choice of which operator you use in your WHERE clauses, but sometimes you do.

Here are the key operators used in the WHERE clause, ordered by their performance. Those operators at the top will produce results faster than those listed at the bottom.

• =
• >, >=, <, <=
• LIKE
• <> 

• A single literal used by itself on one side of an operator
• A single column name used by itself on one side of an operator, a single parameter used by itself on one side of an operator
• A multi-operand expression on one side of an operator
• A single exact number on one side of an operator
• Other numeric number (other than exact), date and time
• Character data, NULLs

The simpler the operand, and using exact numbers, provides the best overall performance.

Try to avoid WHERE clauses that are non-sargable. The term "sargable" (which is in effect a made-up word) comes from the pseudo-acronym "SARG", which stands for "Search ARGument," which refers to a WHERE clause that compares a column to a constant value. If a WHERE clause is sargable, this means that it can take advantage of an index (assuming one is available) to speed completion of the query. If a WHERE clause is non-sargable, this means that the WHERE clause (or at least part of it) cannot take advantage of an index, instead performing a table/index scan, which may cause the query's performance to suffer.

Non-sargable search arguments in the WHERE clause, such as "IS NULL", "<>", "!=", "!>", "!<", "NOT", "NOT EXISTS", "NOT IN", "NOT LIKE",  and "LIKE '%500'" generally  prevents (but not always) the query optimizer from using an index to perform a search. In addition, expressions that include a function on a column, expressions that have the same column on both sides of the operator, or comparisons against a column (not a constant), are not sargable.

But not every WHERE clause that has a non-sargable expression in it is doomed to a table/index scan. If the WHERE clause includes both sargable and non-sargable clauses, then at least the sargable clauses can use an index (if one exists) to help access the data quickly.

In many cases, if there is a covering index on the table, which includes all of the columns in the SELECT, JOIN, and WHERE clauses in a query, then the covering index can be used instead of a table/index scan to return a query's data, even if it has a non-sargable WHERE clause. But keep in mind that covering indexes have their own drawbacks, such as producing very wide indexes that increase disk I/O when they are read.

In some cases, it may be possible to rewrite a non-sargable WHERE clause into one that is sargable. For example, the clause:

WHERE SUBSTRING(firstname,1,1) = 'm'

can be rewritten like this:

WHERE firstname like 'm%'

Both of these WHERE clauses produce the same result, but the first one is non-sargable (it uses a function) and will run slow, while the second one is sargable, and will run much faster.

WHERE clauses that perform some function on a column are non-sargable. On the other hand, if you can rewrite the WHERE clause so that the column and function are separate, then the query can use an available index, greatly boosting performance. for example:

Function Acts Directly on Column, and Index Cannot Be Used:

SELECT member_number, first_name, last_name
FROM members
WHERE DATEDIFF(yy,datofbirth,GETDATE()) > 21

Function Has Been Separated From Column, and an Index Can Be Used:

SELECT member_number, first_name, last_name
FROM members
WHERE dateofbirth < DATEADD(yy,-21,GETDATE())

Each of the above queries produces the same results, but the second query will use an index because the function is not performed directly on the column, as it is in the first example. The moral of this story is to try to rewrite WHERE clauses that have functions so that the function does not act directly on the column.

WHERE clauses that use NOT are not sargable, but can often be rewritten to remove the NOT from the WHERE clause, for example:

WHERE NOT column_name > 5

to

WERE column_name <= 5

Each of the above clauses produce the same results, but the second one is sargable.

If you don't know if a particular WHERE clause is sargable or non-sargable, check out the query's execution plan in Query Analyzer. Doing this, you can very quickly see if the query will be using index lookups or table/index scans to return your results.

With some careful analysis, and some clever thought, many non-sargable queries can be written so that they are sargable. Your goal for best performance (assuming it is possible) is to get the left side of a search condition to be a single column name, and the right side an easy to look up value.

If you currently have a query that uses NOT IN, which offers poor performance because the SQL Server optimizer has to use a nested table scan to perform this activity, instead try to use one of the following options instead, all of which offer better performance:

• Use EXISTS or NOT EXISTS
  
   
• Use IN
  
   
• Perform a LEFT OUTER JOIN and check for a NULL condition

When you have a choice of using the IN or the BETWEEN clauses in your Transact-SQL, you will generally want to use the BETWEEN clause, as it is much more efficient. For example:

SELECT customer_number, customer_name
FROM customer
WHERE customer_number in (1000, 1001, 1002, 1003, 1004)

is much less efficient than this:

SELECT customer_number, customer_name
FROM customer
WHERE customer_number BETWEEN 1000 and 1004

Assuming there is a useful index on customer_number, the Query Optimizer can locate a range of numbers much faster (using BETWEEN) than it can find a series of numbers using the IN clause (which is really just another form of the OR clause).

If you have a WHERE clause that includes expressions connected by two or more AND operators, SQL Server will evaluate them from left to right in the order they are written. This assumes that no parenthesis have been used to change the order of execution. Because of this, you may want to consider one of the following when using AND:

• Locate the least likely true AND expression first. This way, if the AND expression is false, the clause will end immediately, saving time.
  
   
• If both parts of an AND expression are equally likely being false, put the least complex AND expression first. This way, if it is false, less work will have to be done to evaluate the expression.

You may want to consider using Query Analyzer to look at the execution plans of your queries to see which is best for your situation.

If you want to boost the performance of a query that includes an AND operator in the WHERE clause, consider the following:

• Of the search criterions in the WHERE clause, at least one of them should be based on a highly selective column that has an index.
  
   
• If at least one of the search criterions in the WHERE clause is not highly selective, consider adding indexes to all of the columns referenced in the WHERE clause.
  
   
• If none of the column in the WHERE clause are selective enough to use an index on their own, consider creating a covering index for this query.

The Query Optimizer will perform a table scan or a clustered index scan on a table if the WHERE clause in the query contains an OR operator and if any of the referenced columns in the OR clause are not indexed (or does not have a useful index). Because of this, if you use many queries with OR clauses, you will want to ensure that each referenced column in the WHERE clause has a useful index.

Whenever SQL Server has to perform a sorting operation, additional resources have to be used to perform this task. Sorting often occurs when any of the following Transact-SQL statements are executed:

• ORDER BY
• GROUP BY
• SELECT DISTINCT
• UNION
• CREATE INDEX (generally not as critical as happens much less often)

In many cases, these commands cannot be avoided. On the other hand, there are few ways that sorting overhead can be reduced. These include:

• Keep the number of rows to be sorted to a minimum. Do this by only returning those rows that absolutely need to be sorted.
  
   
• Keep the number of columns to be sorted to the minimum. In other words, don't sort more columns that required.
  
   
• Keep the width (physical size) of the columns to be sorted to a minimum.
  
   
• Sort column with number datatypes instead of character datatypes.

When using any of the above Transact-SQL commands, try to keep the above performance-boosting suggestions in mind.

If your SELECT statement contains a HAVING clause, write your query so that the WHERE clause does most of the work (removing undesired rows) instead of the HAVING clause do the work of removing undesired rows. Using the WHERE clause appropriately can eliminate unnecessary rows before they get to the GROUP BY and HAVING clause, saving some unnecessary work, and boosting performance.

For example, in a SELECT statement with WHERE, GROUP BY, and HAVING clauses, here's what happens. First, the WHERE clause is used to select the appropriate rows that need to be grouped. Next, the GROUP BY clause divides the rows into sets of grouped rows, and then aggregates their values. And last, the HAVING clause then eliminates undesired aggregated groups. If the WHERE clause is used to eliminate as many of the undesired rows as possible, this means the GROUP BY and the HAVING clauses will have less work to do, boosting the overall performance of the query.

If your application performs many wildcard (LIKE %) text searches on CHAR or VARCHAR columns, consider using SQL Server's full-text search option. The Search Service can significantly speed up wildcard searches of text stored in a database.

The GROUP BY clause can be sped up if you follow these suggestion:

• Keep the number of rows returned by the query as small as possible.
  
   
• Keep the number of groupings as few as possible.
  
   
• Don't group redundant columns.
  
   
• If there is a JOIN in the same SELECT statement that has a GROUP BY, try to rewrite the query to use a subquery instead of using a JOIN. If this is possible, performance will be faster. If you have to use a JOIN, try to make the GROUP BY column from the same table as the column or columns on which the set function is used.
  
   
• Consider adding an ORDER BY clause to the SELECT statement that orders by the same column as the GROUP BY. This may cause the GROUP BY to perform faster. Test this to see if is true in your particular situation.

Instead of using temporary tables, consider using a derived table instead. A derived table is the result of using a SELECT statement in the FROM clause of an existing SELECT statement. By using derived tables instead of temporary tables, you can reduce I/O and boost your application's performance.

It is fairly common request to write a Transact-SQL query to to compare a parent table and a child table and find out if there are any parent records that don't have a match in the child table. Generally, there are three ways this can be done:

Using a NOT EXISTS

SELECT a.hdr_key
FROM hdr_tbl a
WHERE NOT EXISTS (SELECT * FROM dtl_tbl b WHERE a.hdr_key = b.hdr_key)

Using a LEFT JOIN

SELECT a.hdr_key
FROM hdr_tbl a
LEFT JOIN dtl_tbl b ON a.hdr_key = b.hdr_key
WHERE b.hdr_key IS NULL

Using a NOT IN

SELECT hdr_key
FROM hdr_tbl
WHERE hdr_key NOT IN (SELECT hdr_key FROM dtl_tbl)

In each case, the above query will return identical results. But, which of these three variations of the same query produces the best performance? Assuming everything else is equal, the best performing version through the worst performing version will be from top to bottom, as displayed above. In other words, the NOT EXISTS variation of this query is generally the most efficient.

I say generally, because the indexes found on the tables, along with the number of rows in each table, can influence the results. If you are not sure which variation to try yourself, you can try them all and see which produces the best results in your particular circumstances.

If you need to verify the existence of a record in a table, don't use SELECT COUNT(*) in your Transact-SQL code to identify it, which is very inefficient and wastes server resources. Instead, use the Transact-SQL IF EXITS to determine if the record in question exits, which is much more efficient. For example:

Here's how you might use COUNT(*):

IF (SELECT COUNT(*) FROM table_name WHERE column_name = 'xxx')

Here's a faster way, using IF EXISTS:

IF EXISTS (SELECT * FROM table_name WHERE column_name = 'xxx')

The reason IF EXISTS is faster than COUNT(*) is because the query can end immediately when the text is proven true, while COUNT(*) must count go through every record, whether there is only one, or thousands, before it can be found to be true.

Let's say that you often need to INSERT the same value into a column. For example, perhaps you have to perform 100,000 INSERTs a day into a particular table, and that 90% of the time the data INSERTed into one of the columns of the table is the same value.

If this the case, you can reduce network traffic (along with some SQL Server overhead) by creating this particular column with a default value of the most common value. This way, when you INSERT your data, and the data is the default value, you don't INSERT any data into this column, instead allowing the default value to automatically be filled in for you. But when the value needs to be different, you will of course INSERT that value into the column.

If you have created a complex transaction that includes several parts, one part of which has a higher probability of rolling back the transaction than the others, better performance will be provided if you locate the most likely to fail part of the transaction at the front of the greater transaction. This way, if this more-likely-to-fail transaction has to roll back because of a failure, there has been no resources wasted on the other less-likely-to-fail transactions.

Guidelines for Using Joins

  If you perform regular joins between two or more tables in your queries, performance will be optimized if each of the joined columns have their own indexes. This includes adding indexes to the columns in each table used to join the tables

  If you have to regularly join four or more tables to get the recordset you need, consider de normalizing the tables so that the number of joined tables is reduced. Often, by adding one or two columns from one table to another, joins can be reduced.

  Don't use CROSS JOINS, unless this is the only way to accomplish your goal. What some inexperienced developers do is to join two tables using a CROSS JOIN, then they use either the DISTINCT or the GROUP BY clauses to "clean up" the mess they have created. This, as you might imagine, can be a huge waste of SQL Server resources.

  For maximum performance when joining two or more tables, the indexes on the columns to be joined should have the same data type. This also means that you shouldn't mix non-Unicode and Unicode datatypes when using SQL Server 7.0 or later. (e.g. varchar and nvarchar). If SQL Server has to implicitly convert the data types to perform the join, this not only slows the joining process, but it also could mean that SQL Server may not use available indexes, performing a table scan instead

  Use joins in preference to sub or nested queries for improved performance.

If you have a query that contains two sub selects containing an aggregate function (SUM, Count, etc.) in the SELECT part. The query may perform sluggishly. To rectify the problem, you can replace the sub selects with a series of JOINS  .
So as a rule, should use JOINS in lieu of sub selects when the sub select contains aggregate functions.

Best Practices & Monitoring Points For SQL Database & Server

Best Practices :

1. Application and Database should be on different servers

2. Proper Backup plan should be implemented (Based on Data size and RPO and RTO)

                Plan :    

                i. Full Backup on Sunday

                ii. Differential Backup on Daily

                iii. Log hourly or every fifteen minutes

                iv. System database backup plan should also there

                v. Restore drill

                vi. Backup reports

3. Proper Indexing

                i. Based on Data type, Data size, Fill factor

                ii. Implement Indexs suggested by Sql server engine having high impact and monitor

                iii. Remove indexes not in use

4. Remove all the objects which were never used

5. Update statististics every week or more frequently(depending upon data insertion and updation and deletion)

6. Email notification

                i. Define mailer profile

                ii. Create operators

7. Define Bottlenecks for CPU Utilization (Performance)               

8. Create Logins and give proper roles not all

9. Proper naming convention of sql objects like procedures with prefix usp

10. For heavy data searching use Full text search

11. Proper history clean up

12. Always logoff after completion of task on prod environment

a. SET NOCOUNT ON should be in every proc

b. Proper try and catch should be there
c. Use SARGABLE rules

-> . DR plan should be ready (Disaster Recovery)

->. Apply high availability solution ( Logshiping or replication or clustering) depending upon the use of data

--------------------------------------------------------

Monitoring :

A. Backups, backups should be validated and monitored, Define retention period

B. Monitor job failed and job status

C. Monitor services

D. Monitor CPU Utilization & system performance

E. Monitor database performance

F. Monitor disk spaces

G. Monitor tables (based on iteration prepare plan for partitioning and archival)

H. Monitor security

I. Monitor users and delete orphan users

J. Use ssrs for monitoring create ssrs reports(less costly) or use third party tool (more costly)

K. Restricted Access

L. Long running query and job alert

M. Agent Job history configuration and maintenance

N. Monitor database integrity

Important Links for Sql Server scripts

Sql Server Missing Index Script
Click Here

Sql Server Unused Index Script
Click Here

 Find Unused Indexes of Current Database
Click Here

Identify Numbers of Non Clustered Index on Tables for Entire Database
Click Here

Find a column in SQL database tables

SELECT s.NAME AS ColumnName
 ,sh.NAME + '.' + o.NAME AS ObjectName
 ,o.type_desc AS ObjectType
 ,CASE 
  WHEN t.NAME IN (
    'char'
    ,'varchar'
    )
   THEN t.NAME + '(' + CASE 
     WHEN s.max_length < 0
      THEN 'MAX'
     ELSE CONVERT(VARCHAR(10), s.max_length)
     END + ')'
  WHEN t.NAME IN (
    'nvarchar'
    ,'nchar'
    )
   THEN t.NAME + '(' + CASE 
     WHEN s.max_length < 0
      THEN 'MAX'
     ELSE CONVERT(VARCHAR(10), s.max_length / 2)
     END + ')'
  WHEN t.NAME IN ('numeric')
   THEN t.NAME + '(' + CONVERT(VARCHAR(10), s.precision) + ',' + CONVERT(VARCHAR(10), s.scale) + ')'
  ELSE t.NAME
  END AS DataType
 ,CASE 
  WHEN s.is_nullable = 1
   THEN 'NULL'
  ELSE 'NOT NULL'
  END AS Nullable
 ,CASE 
  WHEN ic.column_id IS NULL
   THEN ''
  ELSE ' identity(' + ISNULL(CONVERT(VARCHAR(10), ic.seed_value), '') + ',' + ISNULL(CONVERT(VARCHAR(10), ic.increment_value), '') + ')=' + ISNULL(CONVERT(VARCHAR(10), ic.last_value), 'null')
  END + CASE 
  WHEN sc.column_id IS NULL
   THEN ''
  ELSE ' computed(' + ISNULL(sc.DEFINITION, '') + ')'
  END + CASE 
  WHEN cc.object_id IS NULL
   THEN ''
  ELSE ' check(' + ISNULL(cc.DEFINITION, '') + ')'
  END AS MiscInfo
 ,CASE 
  WHEN t.NAME IN (
    'char'
    ,'varchar'
    )
   THEN CASE 
     WHEN s.max_length < 0
      THEN 0
     ELSE CONVERT(VARCHAR(10), s.max_length)
     END
  WHEN t.NAME IN (
    'nvarchar'
    ,'nchar'
    )
   THEN CASE 
     WHEN s.max_length < 0
      THEN 0
     ELSE CONVERT(VARCHAR(10), s.max_length / 2)
     END
  END val
INTO #temp
FROM sys.columns s
INNER JOIN sys.types t ON s.system_type_id = t.user_type_id
 AND t.is_user_defined = 0
INNER JOIN sys.objects o ON s.object_id = o.object_id
INNER JOIN sys.schemas sh ON o.schema_id = sh.schema_id
LEFT JOIN sys.identity_columns ic ON s.object_id = ic.object_id
 AND s.column_id = ic.column_id
LEFT JOIN sys.computed_columns sc ON s.object_id = sc.object_id
 AND s.column_id = sc.column_id
LEFT JOIN sys.check_constraints cc ON s.object_id = cc.parent_object_id
 AND s.column_id = cc.parent_column_id
WHERE --t.name in ('nvarchar','nchar','char','varchar')
 S.NAME LIKE 'attendance%' --<--Write your columnname here
ORDER BY sh.NAME + '.' + o.NAME
 ,s.column_id

SELECT *
FROM #temp --where val>500

DROP TABLE #temp

DBA Scenario 1: How to handle 100% CPU Utilization

Hi guys! Today we shall discuss the hot topic how to handle 100% CPU Utilization. DBA face this kind of situation often in their daily life. Some time it is must to solve this situation in production environment as this will hamper the business activity in terms of transactions and money.

The methods we are about to discuss, help only if SQL server is the culprit, You need to first identify whether SQL is consuming all memory resources, then only you need to apply these methods otherwise it will not help you-

I shall cover two methods; both methods are not same and can’t be used at same time. Their aim is same to lower the memory usage but they are applied over different scenario.

Before begin, I want to discuss a myth that is, mostly it is assumed that longer running queries are problem, but it is not true all the time, yes it may cause problem but small concurrent running queries having maximum worker time or maximum execution count can also be a problem. For example a query which is executing before 1 sec can’t be a problem. But the same query if executed 1 lac time concurrently (at the same time) can cause issue.

As per my experience, mostly select queries are the culprit and create such situation so that sql server starts consuming 100 % of memory resources. You can use task manager or resource monitor to find the CPU usage.

Method 1 :

It is a traditional approach, mostly used by DBAs.  Whenever this kind of situation arises, you need to first check for the intense processes running on the server. For this you need to continuously execute one procedure sp_who2 and monitor which spid is increasing gradually, then you need to identify what is going on that session for that use dbcc inputbuffer(<spid>), if it is select query you can kill it but you should not kill transaction and queries having insert update delete on sql tables.

sp_who2

dbcc inputbuffer(<spid>)

kill <spid>

Note: You need to look for spid greater than 50 because less than 50 spids are used by Sql server for its internal working.

Method 2 :

It is more granular approach to optimize the query. In this approach you need to use few DMV’s. Sql server increases the execution_count for same query, if the definition of the query changes new plan is created. So you need to find out the queries having maximum exeution_count and maximum total_worker_time. When you find the record you will get the query plan, which you need to copy and paste to another dmv that is sys.dm_exec_query_stats.

Select * from sys.dm_exec_query_stats order by execution_count desc

Select * from sys.dm_exec_query_stats order by total_worker_time desc

Select * from sys.dm_exec_query_plan(<plan_handle>)

So from above query we will get the execution plan and from there we can view xml view of query and find parameters for the query. After getting queries you can apply sargable rules, these rules are used to optimize queries.

This is how you can trace costly queries and handle 100% CPU Utilization

SSRS - Download all Report files Or Single (RDL) from Report Server

Hi friends! Today my manager asked me to download all reports from Report Server and check in to TFS.

There were plenty of reports almost 1000, so it is difficult to download one by one. I thought this kind of problem come to most of the DBAs so decided to write this blog, I found same script on google and modified it-

Prerequisites & Notes :

1. xp_cmdshell should be enabled. (Part 1)

2. SQL Engine Account should proper write permission on Output Folder where you will get all your reports  

3. Please read comments before execution and follow (Part 2)

4. Change the Report Server database on the query

Part 1 : Enable xp_cmdshell 

EXEC sp_configure 'show advanced options', 1
GO
RECONFIGURE
GO
EXEC sp_configure 'xp_cmdshell', 1
GO
RECONFIGURE
GO
EXEC sp_configure 'show advanced options', 0
GO
RECONFIGURE
GO

Part 2 : Script Implementation

/*

If you want all reports in output folder whether they were published in different folders
in SSRS Report Server then put Null else define folder name
eg: DECLARE @ReportFolderPath AS VARCHAR(500) ='/Folder1/Folder2/'

 

*/

DECLARE @ReportFolderPath AS VARCHAR(500) = null 
/*
If you want some specific report then put its name else put Null
eg: DECLARE @ReportName AS VARCHAR(500) = 'Bill'
*/
DECLARE @ReportName AS VARCHAR(500) = null
/* 
This is the output folder where reports will be generated. Make sure Sql Server Engine Account 
has proper permission on this
*/
DECLARE @OutputFolderLocation AS VARCHAR(500) = 'C:\ReportFolder\'
--To check Folder path
SET @OutputFolderLocation = REPLACE(@OutputFolderLocation,'\','/')
/*
This for bcp access to sql server. If you want to access through sql login use
eg : DECLARE @BCPComponents VARCHAR(1000)='-S"MachineName\SQL2012" -U"SA" -P"Pa$$word"'
or If you want from windows account having permission on sql then
eg : DECLARE @BCPComponents VARCHAR(1000)='-S"1MachineName\SQL2012"'
else null
*/
DECLARE @BCPComponents VARCHAR(1000)= null
DECLARE @SqlQuery AS NVARCHAR(MAX)

IF LTRIM(RTRIM(ISNULL(@OutputFolderLocation,''))) = ''
BEGIN
  SELECT 'Access denied!!!'
END
ELSE
BEGIN


 SET @SqlQuery = STUFF((SELECT
                      ';EXEC master..xp_cmdshell ''bcp  " ' +
                      ' SELECT ' +
                      ' CONVERT(VARCHAR(MAX), ' +
                      '       CASE ' +
                      '         WHEN LEFT(C.Content,3) = 0xEFBBBF THEN STUFF(C.Content,1,3,'''''''') '+
                      '         ELSE C.Content '+
                      '       END) ' +
                      ' FROM ' +
                      ' [ReportServer$SQL2012].[dbo].[Catalog] CL ' +
                      ' CROSS APPLY (SELECT CONVERT(VARBINARY(MAX),CL.Content) Content) C ' +
                      ' WHERE ' +
                      ' CL.ItemID = ''''' + CONVERT(VARCHAR(MAX), CL.ItemID) + ''''' " queryout "' + @OutputFolderLocation + '' + CL.Name + '.rdl" ' + '-T -c -x '+COALESCE(@BCPComponents, '')+''''
                    FROM
                      [ReportServer$SQL2012].[dbo].[Catalog] CL
                    WHERE
                      CL.[Type] = 2 --Report
                      AND '/' + CL.[Path] + '/' LIKE COALESCE('%/%' + @ReportFolderPath + '%/%', '/' + CL.[Path] + '/')
                      AND CL.Name LIKE COALESCE('%' + @ReportName + '%', CL.Name)
                    FOR XML PATH('')), 1,1,'')
  
  SELECT @SqlQuery
  
  --Execute the Dynamic Query
  EXEC SP_EXECUTESQL @SqlQuery
END

Reference : VinayPugalia